Galvanic Replacement Synthesis of VOx@EGaIn-PEG Core-Shell Nanohybrids for Peroxidase Mimics.

The development of high-performance biosensors is a key focus in the nanozyme field, but the current limitations in biocompatibility and recyclability hinder their broader applications. Herein, we address these challenges by constructing core-shell nanohybrids with biocompatible poly(ethylene glycol) (PEG) modification using a galvanic replacement reaction between orthovanadate ions and liquid metal (LM) (VOx@EGaIn-PEG). By leveraging the excellent charge transfer properties and the low band gap of the LM surface oxide, the VOx@EGaIn-PEG heterojunction can effectively convert hydrogen peroxide into hydroxyl radicals, demonstrating excellent peroxidase-like activity and stability (Km = 490 µM, vmax = 1.206 µM/s). The unique self-healing characteristics of LM further enable the recovery and regeneration of VOx@EGaIn-PEG nanozymes, thereby significantly reducing the cost of biological detection. Building upon this, we developed a nanozyme colorimetric sensor suitable for biological systems and integrated it with a smartphone to create an efficient quantitative detection platform. This platform allows for the convenient and sensitive detection of glucose in serum samples, exhibiting a good linear relationship in the range of 10-500 µM and a detection limit of 2.35 µM. The remarkable catalytic potential of LM, combined with its biocompatibility and regenerative properties, offers valuable insights for applications in catalysis and biomedical fields.

Efficient Sequential Detection of Two Antibiotics Using a Fiber-Optic Surface Plasmon Resonance Sensor.

Antibiotic residues have become a worldwide public safety issue. It is vital to detect multiple antibiotics simultaneously using sensors. A new and efficient method is proposed for the combined detection of two antibiotics (enrofloxacin (Enro) and ciprofloxacin (Cip)) in milk using surface plasmon resonance (SPR) sensors. Based on the principle of immunosuppression, two antibiotic antigens (for Enro and Cip) were immobilized on an optical fiber surface with conjugates of bovine serum albumin using dopamine (DA) polymerization. Each single antigen was bound to its corresponding antibody to derive standard curves for Enro and Cip. The fiber-optic sensor's sensitivity was 2900 nm/RIU. Detection limits were calculated to be 1.20 ng/mL for Enro and 0.81 ng/mL for Cip. The actual system's recovery rate was obtained by testing Enro and Cip in milk samples; enrofloxacin's and ciprofloxacin's mean recoveries from the milk samples were 96.46-120.46% and 96.74-126.9%, respectively. In addition, several different regeneration solutions were tested to analyze the two target analytes' regeneration ability; NaOH and Gly-HCl solutions were found to have the best regeneration ability.

Overcoming Endosomal Escape Barriers in Gene Drug Delivery Using De Novo Designed pH-Responsive Peptides.

A major challenge in using nanocarriers for intracellular drug delivery is their restricted capacity to escape from endosomes into the cytosol. Here, we significantly enhance the drug delivery efficiency by accurately predicting and regulating the transition pH (pH0) of peptides to modulate their endosomal escape capability. Moreover, by inverting the chirality of the peptide carriers, we could further enhance their ability to deliver nucleic acid drugs as well as antitumor drugs. The resulting peptide carriers exhibit versatility in transfecting various cell types with a high efficiency of up to 90% by using siRNA, pDNA, and mRNA. In vivo antitumor experiments demonstrate a tumor growth inhibition of 83.4% using the peptide. This research offers a potent method for the rapid development of peptide vectors with exceptional transfection efficiencies for diverse pathophysiological indications.

Shear-Induced Fabrication of Cellulose Nanofibril/Liquid Metal Nanocomposite Films for Flexible Electromagnetic Interference Shielding and Thermal Management.

To address electromagnetic interference (EMI) pollution in modern society, the development of ultrathin, high-performance, and highly stable EMI shielding materials is highly desired. Liquid metal (LM) based conductive materials have received enormous amounts of attention. However, the processing approach of LM/polymer composites represents great challenges due to the high surface tension and cohesive energy of LMs. In this study, we develop a universal one-step fabrication strategy to directly process composites containing LMs and cellulose nanofibrils (CNFs) and successfully fabricate the ultrathin, flexible, and stable EMI shielding films with an average specific EMI shielding efficiency (EMI SE) value of 429 dB/mm and small thickness of only 70 µm in the wide frequency range of 8.2-18 GHz. In addition, the resulting films also exhibit excellent mechanical performance and flexibility, which endow the film with the ability to withstand repeated folding, bending, and folding into complex shapes without producing cracks or fractures. Besides, the resulting films display excellent thermal conductivity with a λ of 4.90 W/(m K) and an α of 3.17 mm2/s. Thus, the presented approach shows great potential in fabricating advanced materials for EMI shielding applications.

Time-resolved fluoroimmunoassay for Aspergillus detection based on anti-galactomannan monoclonal antibody from stable cell line.

Invasive Aspergillosis is a high-risk illness with a high death rate in immunocompromised people due to a lack of early detection and timely treatment. Based on immunology study, we achieved an efficient production of anti-galactomannan antibody by Chinese hamster ovary (CHO) cells and applied it to time-resolved fluoroimmunoassay for Aspergillus galactomannan detection. We first introduced dual promoter expression vector into CHO host cells, and then applied a two-step screening strategy to screen the stable cell line by methionine sulfoximine pressurization. After amplification and fermentation, antibody yield reached 4500 mg/L. Then we conjugated the antibodies with fluorescent microspheres to establish a double antibody sandwich time-resolved fluoroimmunoassay, which was compared with the commercial Platelia™ Aspergillus Ag by clinical serum samples. The preformed assay could obtain the results in less than 25 min, with a limit of detection for galactomannan of approximately 1 ng/mL. Clinical results of the two methods showed that the overall percent agreement was 97.7% (95% CI: 96.6%-98.4%) and Cohen's kappa coefficient was 0.94. Overall, the assay is highly consistent with commercial detection, providing a more sensitive and effective method for the rapid diagnosis of invasive aspergillosis.

Rational design of antibodies and development of a novel method for (1-3)-ß-D glucan detection as an alternative to Limulus amebocyte lysate assay.

With advances in medicine, increasing medical interventions have increased the risk of invasive fungal disease development. (1-3)-ß-D glucan (BDG) is a common fungal biomarker in serological tests. However, the scarcity of Limulus resources for BDG detection poses a challenge. This study addresses the need for an alternative to Limulus amebocyte lysate by using BDG mutant antibody for chemiluminescence detection. The wild-type BDG antibody was obtained by immunizing rabbits. An optimal V52HI/N34L Y mutant antibody, which has increased 3.7-fold of the testing efficiency compared to the wild-type antibody, was first achieved by mutating "hot-spot" residues that contribute to strong non-covalent bonds, as determined by alanine scanning and molecular dynamics simulation. The mutant was then applied to develop the magnetic particle chemiluminescence method. 574 clinical samples were tested using the developed method, with a cutoff value of 95 pg/mL set by Limulus amebocyte lysate. The receiver operating characteristic curve demonstrated an area under the curve of 0.905 (95% CI: 0.880-0.929). Chemiluminescence detected an antigen concentration of 89.98 pg/mL, exhibiting a sensitivity of 83.33% and specificity of 89.76%. In conclusion, the results showed a good agreement with Limulus amebocyte lysate and demonstrated the feasibility of using BDG mutant antibodies for invasive fungal disease diagnosis. The new method based on chemiluminescence for detecting BDG could shorten the sample-to-result time to approximately 30 min, rescue Limulus from being endangered and is resource efficient in terms of equipment and the non-use of a skilled technician.

Computational Design of Peptide Assemblies.

With the ongoing development of peptide self-assembling materials, there is growing interest in exploring novel functional peptide sequences. From short peptides to long polypeptides, as the functionality increases, the sequence space is also expanding exponentially. Consequently, attempting to explore all functional sequences comprehensively through experience and experiments alone has become impractical. By utilizing computational methods, especially artificial intelligence enhanced molecular dynamics (MD) simulation and de novo peptide design, there has been a significant expansion in the exploration of sequence space. Through these methods, a variety of supramolecular functional materials, including fibers, two-dimensional arrays, nanocages, etc., have been designed by meticulously controlling the inter- and intramolecular interactions. In this review, we first provide a brief overview of the current main computational methods and then focus on the computational design methods for various self-assembled peptide materials. Additionally, we introduce some representative protein self-assemblies to offer guidance for the design of self-assembling peptides.

Efficient composite chlorinated ethenes removal using gallic acid to enhance Fe/Ni nanoparticles activated persulfate.

As the representative volatile chlorinated hydrocarbons detected in wastewater, the removal of composite chlorinated ethenes is a major challenge in wastewater treatment. In the present study, an efficient removal system for composite chlorinated ethenes was reported, in which gallic acid was used to enhance the activation of persulfate by Fe/Ni nanoparticles. The influences of gallic acid-Fe/Ni and persulfate concentrations, initial pH value, reaction temperature, inorganic anions, and natural organic matters were evaluated in the composite chlorinated ethenes removal. Our results showed that the gallic acid-Fe/Ni-persulfate system with 9.0 mM of gallic acid-Fe/Ni and 30.0 mM of persulfate yielded about 100% trichloroethylene removal and 97.3%-98.6% perchloroethylene removal in the pH range of 3.0-12.0. Electron paramagnetic resonance analysis and radical quenching experiments indicated that SO4•- and •OH were the predominant radical species under acidic and alkaline conditions. Ultraviolet visible spectroscopy and inductively coupled plasma optical emission spectrometer tests revealed the Fe-gallic acid chelation could regulate the concentration of iron ions and improve the reactivity of gallic acid-Fe/Ni. These results demonstrated that the gallic acid-Fe/Ni-persulfate system was a promising strategy for treating composite chlorinated ethenes-containing wastewater.

Algae-derived biochar nanozyme array for discrimination and detection of multiple pesticides in soil, water and food.

Despite the potential of nanozymes combined with sensor arrays for discriminating multiple pesticides simultaneously, they have few practical pesticide sensing uses due to the limited performance of existing nanozymes and the complexity of their preparation. Here, agricultural waste is utilized for the facile synthesis of high-performance biochar nanozymes and the fabrication of biochar nanozyme sensor arrays. The production of autogenous N-doped biochars with abundant surface functional groups and good peroxidase-like activities is achieved with different types of algae. High-performance biochar nanozyme sensor arrays can discriminate pesticides in a concentration range from 1 to 500 µM and in real samples from soil, lake water, seawater, apples, cucumbers, peaches, tomatoes and cabbages. Furthermore, pesticides can be quantified down to 1 µM. The development of high-performance nanozyme sensor arrays based on waste conversion could be a step toward pesticide discrimination and detection, which would improve human and environmental safety.

Tannic acid promotes the activation of persulfate with Fe(ii) for highly efficient trichloroethylene removal.

Trichloroethylene (TCE) is an Environmental Protection Agency (EPA) priority pollutant that is difficult to be removed by some remediation methods. For instance, TCE removal using persulfate (PS) activated by ferrous iron (Fe(ii)) has been tested but is limited by the unstable Fe(ii) concentration and the initial pH of contaminated water samples. Here we reported a new TCE removal system, in which tannic acid (TA) promoted the activation of PS with Fe(ii) (TA-Fe(ii)-PS system). The effect of initial pH, temperature, and concentrations of PS, Fe(ii), TA, inorganic anions and humic acid on TCE removal was investigated. We found that the TA-Fe(ii)-PS system with 80 mg L-1 of TA, 1.5 mM of Fe(ii) and 15 mM of PS yielded about 96.2-99.1% TCE removal in the pH range of 1.5-11.0. Radical quenching experiments were performed to identify active species. Results showed that SO4˙- and ˙OH were primarily responsible for TCE removal in the TA-Fe(ii)-PS system. In the presence of TA, the Fe-TA chelation and the reduction of TA could regulate Fe(ii) concentration and activate persulfate for continuously releasing reactive species under alkaline conditions. Based on the excellent removal performance for TCE, the TA-Fe(ii)-PS system becomes a promising candidate for controlling TCE in groundwater.

Organohydrogels with cellulose nanofibers enhanced supramolecular interactions toward high performance self-adhesive sensing pads.

Gel materials with tailored functions and tissue-like properties have gained significant interest in emerging applications, including tissue engineering scaffolds, flexible electronics, and soft robotics. In this work, we developed a stretchable, flexible, adhesive, and conductive organohydrogel through physical cross-linking of the poly (N-[tris (hydroxymethyl) methyl] acrylamide-co-acrylamide) (denoted as P(THMA-AM)) network in the presence of cellulose nanofiber (CNF), sodium chloride, and glycerol. The gel matrix is rich in intermolecular interactions, including hydrogen bonding and ionic interactions, which contribute to a highly compact and cohesive structure without the requirement of any chemical crosslinkers. Moreover, the plasticizing effect of glycerol can mitigate the self-entanglement of CNFs, enhancing their mobility and ultimately conferring the organohydrogel with exceptional stretchability and flexibility. The resulting organohydrogel exhibited superior mechanical properties, self-adhesion, and ionic conductivity, making it an excellent candidate for strain-sensing applications, particularly in distinguishing and monitoring human movements.

An ultra pH-responsive peptide nanocarrier for cancer gene therapy.

The tumor microenvironment is a very complex and dynamic ecosystem. Although a variety of pH-responsive peptides have been reported to deliver nucleic acid drugs for cancer treatment, these responses typically only target the acidic microenvironment of the tumor or the lysosome, and the carrier suffers from issues such as low transfection efficiency and poor lysosomal escape within the cell. To address this problem, we have developed an ultra pH-responsive peptide nanocarrier that can efficiently deliver siRNA, pDNA, and mRNA into cancer cells by performing progressive dynamic assembly in response to pH changes in the acidic tumor microenvironment (pH 6.5-6.8) and the acidic intracellular lysosomal environment (pH 5.0-6.0). The maximum transfection efficiency was 87.1% for pDNA and 74.9% for mRNA, which is higher than that of peptide-based nanocarrier reported to date. In addition, the targeting sequence on the surface allows the peptide@siRNA complex to efficiently enter cancer cells, causing 96% of cancer cell mortality. The carrier has high biocompatibility and low cytotoxicity, making it highly promising for application in immunotherapy and gene therapy of tumors.

Enzyme-Driven, Switchable Catalysis Based on Dynamic Self-Assembly of Peptides.

Covalent regulatory systems of enzymes are widely used to modulate biological enzyme activities. Inspired by the regulation of reactive-site phosphorylation in organisms, we developed peptide-based catecholase mimetics with switchable catalytic activity and high selectivity through the co-assembly of nanofibers comprising peptides and copper ions (Cu2+ ). Through careful design and modification of the peptide backbone structure based on the change in the free energy of the system, we identified the peptide with the most effective reversible catalytic activity. Kinase/phosphatase switches were used to control the reversible transition of nanofiber formation and depolymerization, as well as to modulate the active-site microenvironment. Notably, the self-assembly and disassembly processes of nanofibers were simulated using coarse-grained molecular dynamics. Furthermore, theoretical calculations confirmed the coordination of the peptide and Cu2+ , forming a zipper-like four-ligand structure at the catalytically active center of the nanofibers. Additionally, we conducted a comprehensive analysis of the catalytic mechanism. This study opens novel avenues for designing biomimetic enzymes with ordered structures and dynamic catalytic activities.

Multicomponent structural color membrane based on soft lithography array for high-sensitive Raman detection.

Inspired by ordered photonic crystals and structural color materials in nature, we successfully prepared hydroxypropyl cellulose (HPC) photonic films with ordered surface arrays by double-imprint soft lithography. Then we introduced another important material of the cellulose family, cellulose nanocrystals (CNC), which has liquid crystal nature and birefringent properties of the particles, into the system to realize the single-point shrinkage of the film array and the control of structural color. Through multi-component doping and concentration control, we further optimized the multi-scale structure of the materials, and obtained HPC/CNCs composite photonic films with excellent properties in color, stability and flexibility, whose elastic modulus and tensile properties are significantly higher than those of single-component. Further loading of SiO2@PDA enhances the color saturation and realizes the in-situ reduction of metal ions on the film surface. This plasma film can track a variety of substances with high sensitivity and long-term stability, showing potential application prospects in the field of surface-enhanced Raman scattering (SERS), which provides a potential possibility for chiral structures to be used in the field of biosensor detection and circularly polarized luminescence.

A rapid removal of Phaeocystis globosa from seawater by peroxymonosulfate enhanced cellulose nanocrystals coagulation.

Cellulose nanocrystals (CNC) are recognized as promising bio-based flocculants for controlling harmful algal blooms (HABs). Due to the charge shielding effect in seawater and the strong mobility of algae cells, CNC can't effectively remove Phaeocystis globosa from seawater. To solve this problem, peroxymonosulfate (PMS) was used to enhance the coagulation of CNC for rapidly removal of P. globosa. The results showed that 91.7% of Chl-a, 95.2% of OD680, and 97.2% of turbidity of P. globosa were reduced within 3 h with the use of 200 mg L-1 of CNC and 20 mg L-1 of PMS. The removal of P. globosa was consisted of inactivation and flocculation. Notably, electron paramagnetic resonance (EPR) spectrums and quenching experiments revealed that the inactivation of P. globosa was dominated by PMS oxidation and 1O2. Subsequently, CNC entrained inactivated algal cells to settle to the bottom to achieve efficient removal of P. globosa. The content of total organic carbon (TOC) and chemical oxygen demand (COD) decreased significantly, indicating that a low emission risk of algal cell effluent was produced in the CNC-PMS system. In view of the excellent performance on P. globosa removal, we believe that the CNC-PMS system has great potential for HABs treatments.

Efficient removal of chloroform from groundwater using activated percarbonate by cellulose nanofiber-supported Fe/Cu nanocomposites.

Chloroform (CF) is a recalcitrant halogenated methane (HM) that has received widespread attention due to its frequent detection in groundwater and its potential carcinogenic risk. In this study, TEMPO-oxidized cellulose nanofiber-supported iron/copper bimetallic nanoparticles (TOCNF-Fe/Cu), a novel composite catalyst, was synthesized to activate sodium percarbonate (SPC) for the removal of CF from groundwater. The results showed that over 96.3% of CF could be removed in a neutral reaction medium (pH 6.5-9) within 180 min using 0.66 g L-1 of TOCNF (0.32)-Fe/Cu (1) and 1 mM of SPC, which outperforms typical advanced oxidation processes. The reaction mechanism of the TOCNF-Fe/Cu-SPC system for the CF removal was elucidated. As demonstrated through electron paramagnetic resonance and quenching experiments, the TOCNF-Fe/Cu-SPC system was found to include •OH and O2•-, where the latter played a dominant role in the CF removal. DFT calculations indicated that TOCNF improved the electron transport capability of Fe/Cu and reduced the transition state energy. The Fe species on the surface of TOCNF-Fe/Cu were identified as the primary active sites for SPC activation, whereas the Cu species were beneficial to the regeneration of the Fe species. Additionally, TOCNF-Fe/Cu was found to have good recyclability and stability. The feasibility of the TOCNF-Fe/Cu-SPC system was further confirmed by applying it for the efficient removal of composite HMs from actually contaminated groundwater. Overall, the TOCNF-Fe/Cu-SPC system is an attractive candidate for the treatment of HM-contaminated groundwater.

High Sensitivity Temperature Sensing of Long-Period Fiber Grating for the Ocean.

In this study, a new temperature sensor with high sensitivity was achieved by four-layer Ge and B co-doped long-period fiber grating (LPFG) based on the mode coupling principle. By analyzing the mode conversion, the influence of the surrounding refractive index (SRI), the thickness and the refractive index of the film on the sensitivity of the sensor is studied. When 10 nm-thick titanium dioxide (TiO2) film is coated on the surface of the bare LPFG, the refractive index sensitivity of the sensor can be initially improved. Packaging PC452 UV-curable adhesive with a high-thermoluminescence coefficient for temperature sensitization can realize high-sensitivity temperature sensing and meet the requirements of ocean temperature detection. Finally, the effects of salt and protein attachment on the sensitivity are analyzed, which provides a reference for the subsequent application. The sensitivity of 3.8 nm/°C in the range of 5-30 °C was achieved for this new sensor, and the resolution is about 0.00026 °C, which is over 20 times higher than ordinary temperature sensors. This new sensor meets the accuracy and range of general ocean temperature measurements and could be used in various marine monitoring and environmental protection applications.

Gold Nanoparticles Mineralized by Peptide Liquid Crystals with Dual-Functional Enzyme-like Activities: An Automatic Membrane Reactor for Glucose Detection.

The development of stable multifunctional enzyme mimics with tandem catalytic effects provides a great opportunity to construct economical and convenient bioassays. Inspired by biomineralization, in this work self-assembled N-(9-fluorenylmethoxycarbonyl)-protected tripeptide (Fmoc-FWK-NH2) liquid crystals were used as templates to in situ mineralize Au nanoparticles (AuNPs), and then a dual-functional enzyme-mimicking membrane reactor based on AuNPs and peptide-based hybrids was constructed. AuNPs with a uniform particle size and good dispersion were in situ reduced on the surface of the peptide liquid crystal due to the reduction of the indole group on the tryptophan residue, which exhibited excellent peroxidase-like and glucose oxidase-like activities simultaneously. Meanwhile, the oriented nanofibers aggregated into a three-dimensional network, which was further immobilized on the mixed cellulose membrane to form a membrane reactor. A biosensor was made to realize fast, low-cost, and automatic detection for glucose. This work represents a promising platform for the design and construction of novel multifunctional materials based on the biomineralization strategy.

Nanocellulose-based hydrogels for drug delivery.

Hydrogels, as a class of three-dimensional (3D) polymer networks, are important candidates for drug delivery owing to their high porosity and hydrophilicity. Generally, clinical applications put forward various requirements for drug delivery systems (DDSs), such as low toxic side effects, high biocompatibility, targeting, controllable release, and high drug loading. In recent years, nanocellulose, including cellulose nanocrystals (CNCs) and cellulose nanofibrils (CNFs), has emerged as a promising material for hydrogel-based DDSs. This is due to its high surface area, abundant surface hydroxyl groups that can be easily chemically modified for multifunctionalization, natural origin leading to high biocompatibility and degradability, etc. This review provides a comprehensive overview of the preparation methods for hydrogels based on CNCs/CNFs for use in drug delivery systems, including physical crosslinking and chemical crosslinking. Additionally, various carrier forms such as hydrogel particles, hydrogel films, injectable hydrogels, and sprayable hydrogels are discussed. Key drug delivery parameters including loading and release efficiency as well as responses to different stimuli are also examined in detail. Finally, in view of the subdivision of drug delivery, the opportunities and challenges of nano cellulose based hydrogels were proposed from the perspective of application, and the potential research directions were pointed out.

Spray-Drying Hydrophobic Cellulose Nanocrystal Coatings with Degradable Biocide Release for Marine Antifouling.

With increasing awareness about the ecological environment, increased attention has been paid to the application of eco-friendly materials in the field of marine antifouling. In this work, a novel coating having good mechanical strength and static marine antifouling characteristics was fabricated using cellulose nanocrystals (CNCs) as the skeleton material, with in situ growth of SiO2 as the basic superhydrophobic material and introducing hexadecyl trimethyl ammonium bromide (CTAB) and 4-bromo2-(4-chlorophenyl)-5-(trifluoromethyl)-1H-pyrrole-3-carbonitrile (Econea) into the coating. Due to the high strength and rod structure of CNCs, the coating maintained super-hydrophobicity after 50 cycles of abrasion tests. Moreover, the addition of CTAB during the synthesis of SiO2 led to the hydrolysis and polycondensation of tetraethyl orthosilicate at the micellar interface. Econea was fully mixed with SiO2 nanoparticles, thus slowing down the rate of release of Econea. Meanwhile, the adhesion between the coating and the substrate reached 1.9 MPa, which can meet the application requirements for marine environments. The bioassay using bacteria (Escherichia coli) and diatoms (Nitzschia closterium) showed that the rate of inhibition of the coating on bacteria and diatoms could reach 99 and 90%, respectively, after immersion in artificial seawater for 28 days. This research provides a facile and promising fabricating solution of an eco-friendly CNC-based coating having strong antifouling characteristics suitable for marine environments.